standard Wheel with ball bearing and injection-moulded polyurethane with hardness 92 ° shore A on polyamide
Wheel diameter x width: 200 x 50 mm
Axle hole: 20 mm
Hub length: 58 mm
Approved and tested load capacity
Dynamic 500 kg
Static 620 kg
Temperature range:
Continious operation: -25 | +55°C
Short (10 min) exposure: -30 | +55°C
Advantages of this Jump floor champion wheel:
✓ stoney floor
✓-proof
✓ high temperature differences
standard wheel + injection-moulded polyurethane Ø200 x W50mm for 500kg Prod ID: 40453
- Product description
- Deep draw press forming and surface treatment of OE steel parts is our expertise
Product description
Deep draw press forming and surface treatment of OE steel parts is our expertise
Deep draw press forming and surface treatment of OE steel parts is our expertise
Product information
- Article code 2-050-40K
- SKU 40453
- EAN 3838461404535
Specifications
Recently viewed
-
Transport wheel with injection-moulded polyurethane Ø200 x W50mm for 500kg
ID 40453:standard Wheel with ball bearing and injection-moulded polyurethane with hardnes...
-
-
Swivel castor + solid polypropylene wheel Ø100 x W35mm for 125kg
ID 32393: Castor overall height 128 mm | 4 mounting holes with distance 80x60 mm | Wheel w...
-
-
Swivel castor with brake + solid polypropylene wheel Ø100 x W38mm for 200kg
ID 42815: Castor overall height 128 mm | 4 mounting holes with distance 80x60 mm | Wheel w...
-
-
Swivel castor + injection-moulded polyurethane Ø100 x W32mm for 150kg
ID 40583: Castor overall height 128 mm | 4 mounting holes with distance #$% mm | Wheel wit...
-
-
Swivel castor with brake + grey rubber tread Ø125 x W37mm for 130kg
ID 39245: Castor overall height 155 mm | 4 mounting holes with distance 80x60 mm | Wheel w...
-
