standard Wheel with roller bearing and injection-moulded polyurethane with hardness 92 ° shore A on polyamide
Wheel diameter x width: 125 x 32 mm
Axle hole: 8,5 mm
Hub length: 44 mm
Approved and tested load capacity
Dynamic 200 kg
Static 250 kg
Temperature range:
Continious operation: -25 | +55°C
Short (10 min) exposure: -30 | +55°C
Advantages of this Jump floor champion wheel:
✓ stoney floor
✓-proof
✓ high temperature differences
standard wheel + injection-moulded polyurethane Ø125 x W32mm for 200kg Prod ID: 40425
- Product description
- Deep draw press forming and surface treatment of OE steel parts is our expertise
Product description
Deep draw press forming and surface treatment of OE steel parts is our expertise
Deep draw press forming and surface treatment of OE steel parts is our expertise
Product information
- Article code 2-050-25V
- SKU 40425
- EAN 3838461404252
Specifications
Recently viewed
-
Transport wheel with injection-moulded polyurethane Ø125 x W32mm for 200kg
ID 40425:standard Wheel with roller bearing and injection-moulded polyurethane with hardn...
-
-
Swivel castor with brake + solid polypropylene wheel Ø125 x W38mm for 150kg
ID 34594: Castor overall height 155 mm | 4 mounting holes with distance #$% mm | Wheel wit...
-
-
Fixed castor + solid polypropylene wheel Ø125 x W38mm for 150kg
ID 42873: Castor overall height 155 mm | 4 mounting holes with distance 80x60 mm | Wheel w...
-
-
Swivel castor with brake + injection-moulded polyurethane Ø160 x W50mm for 300kg
ID 40635: Castor overall height 190 mm | 4 mounting holes with distance #$% mm | Wheel wit...
-
-
Swivel castor + polyethylene tread Ø100 x W24mm for 70kg
ID 44816: Castor overall height 123 mm | 4 mounting holes with distance 43x43 mm | Wheel w...
-
